|
Tongue Depressors |
Tom's of Maine Best PricesMackie 808MMackie 808M Mackie 808M Description: Twin 600W FR Series amps deliver 1,200 real watts @ 2 ohms and are switchable as mains or mains/monitors. The 8 mic/line channels feature phantom power, inserts on 1 through 6, and dual line inputs on channels 7 and 8. Each channel has 3-band EQ, and separate, studio-grade 9-band graphic EQs are provided for mains and monitors. The graphic EQs feature multiple summing amplifiers and precision infinite feedback band-pass filters for superior linear phase and combining properties. They are ultra-low noise, low distortion, and sound great. Rugged, injection-molded chassis. Sealed rotary controls resist dirt and dust. Mackie 808M Features: 1200 real watts @ 2 ohms from twin 600-watt FR Series High-Current power amps Power amps switchable as mains or mains plus monitors 8 mic/line channels with phantom power Dual line inputs on channels 7 and 8 Inserts on channels 1-6 Active 3-band EQ on each channel 2 separate 9-band, audiophile-quality graphic EQs--one on mains and one on monitors Level-setting control & LED on every PPM mixer channel-makes setting input levels a snap Mil-spec fiberglass circuit boards (instead of cheap phenolic) resist physical impact Amp routing switch assigns power amps to mains or mains and monitors Hefty 10,000µf storage capacitors for high peak power reserves Massive toroidal transformer for high current output Mega-cool die-cast heat sink. Mackie 808M Specification: Frequency Response Mic Input to Main Mixer Output (Trim at 0 dB) +0, -1 dB 32Hz to 20kHz +0, -3 dB 16Hz to 80kHz Mic Input to Power Amp Output at rated power output: +0, -1 dB 32Hz to 20kHz +0, -3 dB 16Hz to 55kHz Distortion: THD and SMPTE IMD; 20 Hz to 20 kHz Mic Input to Main Mixer Output < 0.005% at +4 dBu output Mic Input to Power Amp Output < 0.15% 250 mW to rated power Common Mode Rejection Ratio: (CMRR) at 1kHz, Trim at 0 dB 60 dB Noise: 20Hz-20kHz bandwidth, 150-ohm source impedence Equivalent Input Noise (EIN): -127 dBu Residual Output Noise with Main Mixer, Monitor, & Effects outputs, Channel & Master levels off: -95 dBu Main Mixer Output Noise with Master at nominal (-10dB), all channels off: -92 dBu with Master and one input at nominal (-10dB and -20dB), Trim at 0dB: -85 dBu Crosstalk, at 1 kiloHertz: Adjacent Inputs or Input to Output: -90 dB Fader Off: -90 dB Break Switch Mute: -80 dB Input Level Trim Control Range: 0 to -40dB Phantom Power: +15V DC Equalization: Rumble Reduction 75hz, -18dB/octave Channel EQ High ±15dB at 12kHz Mid ±12dB at 2.5kHz Low ±15dB at 80Hz Graphic EQ: 9 bands, ±15dB, Q=1.414 ISO octave centers at 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 16KHz Main Mixer Section Rated Output: Main Mixer, Monitor, and Effects +4 dBu Maximum Main Mixer Section Output +20 dBu Input Sensitivity (Minimum Input Level to produce +4dBu at Main Mixer Output) Mic Input: -68dBu Insert Input: -28dBu Line Input: -48dBu Stereo Line Input:CLICK HERE FOR BEST PRICE Mackie 406MMackie 406M Mackie 406M Description: Powered Mixers for Professionals The Mackie 406M powered audio mixer delivers 500 real watts into 2 ohms from twin 250W FR Series High Current power amps, switchable as mains or mains plus monitor. The mixing console provides 6 mic/line channels with inserts, input gain controls with level set LED on each channel, active 3-band EQ on each channel, and 2 separate 9-band graphic EQs for mains and monitors. Mackie 406M features: 500 real watts/2 ohms from twin 250-watt FR Series High-Current power amps Power amps switchable as mains or main plus monitor 6 mic/line channels with master phantom power Inserts on all 6 channels Active 3-band EQ on each channel 2 separate 9-band, audiophile-quality graphic EQs-- one on mains and one on monitor All PPM Series Powered Mixers feature: Rugged injection-molded chassis resists impacts that would destroy a rat-fur-covered wood box powered mixer. Built-in handle can be used by folks who don't have the foggiest idea of what injection molding is. A real Mackie mic/line mixer section! Based on our world-famous MicroSeries 1202-VLZ and enhanced with new mic preamps and about a gazillion ingenious extra features. Rugged, sealed rotary controls resist dust, moisture and other contamination. Expensive, studio-grade, 9-band program equalizers for mains and monitor that utilize multiple summing amplifiers and precision infinite feedback band-pass filters, which yield superior linear-phase and combining properties. What this means is our graphic EQs are exceptionally low-noise, low-distortion, sound great, and don't suffer from any nasty phase-shift problems. Level-setting control & LED on every PPM mixer channel-makes setting input levels a snap. Mil-spec fiberglass circuit boards (instead of cheap phenolic) resist physical impact. Amp routing switch assigns power amps to mains or mains + monitors. Hefty 10,000µf storage capacitors for high peak power reserves. Massive toroid transformer for high current output. PPM Series heat sink Mega-cool die-cast heat sink. 1-piece die-cast heat sink is custom-cast for maximum heat dissipation and minimum car upholstery destruction. Black coating improves efficiency by 15%. Running Man figure improves coolness-factor by 150%. Mackie 406M Specification: Frequency Response Mic Input to Main Mixer Output (Trim at 0 dB) +0, -1 dB 32Hz to 20kHz +0, -3 dB 16Hz to 80kHz Mic Input to Power Amp Output at rated power output: +0, -1 dB 32Hz to 20kHz +0, -3 dB 16Hz to 55kHz Distortion: THD and SMPTE IMD; 20 Hz to 20 kHz Mic Input to Main Mixer Output < 0.005% at +4 dBu output Mic Input to Power Amp Output < 0.15% 250 mW to rated power Common Mode Rejection Ratio: (CMRR) at 1kHz, Trim at 0 dB 60 dB Noise: 20Hz-20kHz bandwidth, 150-ohm source impedence Equivalent Input Noise (EIN): -127 dBu Residual Output Noise with Main Mixer, Monitor, & Effects outputs, Channel & Master levels off: -95 dBu Main Mixer Output Noise with MastCLICK HERE FOR BEST PRICE Mackie 808SMackie 808S Mackie 808S Description: The same power amp structure as the 808M mono mixer, plus stereo I/O capability and several other important additional features. Twin 500W FR Series amps deliver 1,000W @ 4 ohms and are switchable as mains or main/monitors. 8 mic/line channels feature master phantom power, inserts on 1-6. 1/4" stereo inputs on channels 7 and 8, stereo pan control on all 8 channels, true stereo 9-band graphic EQ on mains, plus a 9-band for the monitors. It includes a 32-bit custom EMAC® digital effects processor with 16 different effects and 2 controllable parameters per effect, a special EFX WIDE effects-enhancement switch, and a way-cool Break switch that mutes channels 1-6 during breaks. It also features Mackie's renowned discrete mic pre-amps (the best found on any powered mixer), and an amp-routing switch that lets you assign power amps to mains only or mains and monitors. An external effects section has separate sends and returns, plus a footswitch jack to override internal and external effects. Mixer line-out jack lets you add extra power amps. 8 mic/line channels feature master phantom power, inserts on 1 through 6, and dual line inputs on channels 7 and 8. Each channel is provided with 3-band EQ and separate 9-band graphic EQs are provided for mains and monitors. Mackie 808S Features: 1200 real watts/2 ohms from twin 600-watt FR Series High-Current power amps Power amps switchable as stereo mains or main plus monitor 8 mic/line channels with master phantom power Stereo line inputs on channels 7 and 8 Inserts on channels 1-6 Active 3-band EQ and stereo pan control on each channel True stereo 9-band graphic EQ on mains 9-band graphic EQ on monitor Mackie 808S Specification: Frequency Response Mic Input to Main Mixer Output (Trim at 0 dB) +0, -1 dB 32Hz to 20kHz +0, -3 dB 16Hz to 80kHz Mic Input to Power Amp Output at rated power output: +0, -1 dB 32Hz to 20kHz +0, -3 dB 16Hz to 55kHz Distortion: THD and SMPTE IMD; 20 Hz to 20 kHz Mic Input to Main Mixer Output < 0.005% at +4 dBu output Mic Input to Power Amp Output < 0.15% 250 mW to rated power Common Mode Rejection Ratio: (CMRR) at 1kHz, Trim at 0 dB 60 dB Noise: 20Hz-20kHz bandwidth, 150-ohm source impedence Equivalent Input Noise (EIN): -127 dBu Residual Output Noise with Main Mixer, Monitor, & Effects outputs, Channel & Master levels off: -95 dBu Main Mixer Output Noise with Master at nominal (-10dB), all channels off: -92 dBu with Master and one input at nominal (-10dB and -20dB), Trim at 0dB: -85 dBu Crosstalk, at 1 kiloHertz: Adjacent Inputs or Input to Output: -90 dB Fader Off: -90 dB Break Switch Mute: -80 dB Input Level Trim Control Range: 0 to -40dB Phantom Power: +15V DC Equalization: Rumble Reduction 75hz, -18dB/octave Channel EQ High ±15dB at 12kHz Mid ±12dB at 2.5kHz Low ±15dB at 80Hz Graphic EQ: 9 bands, ±15dB, Q=1.414 ISO octave centers at 63Hz, 125Hz, 250Hz, 500Hz, 1kHz, 2kHz, 4kHz, 8kHz, 16KCLICK HERE FOR BEST PRICE More Tom's of Maine Reading: |
HOME
:CRITICAL-CARE.CO.UK Health and Nutrition © 1999-2009.